A steel quill stem for use with a threaded steerer. The handlebar clamp is 1-inch (25.4mm) diameter. The quill stem is marked 22.2 mm diameter and is compatible
with a 1-inch steerer tube (7/8 ID) Top of the blue tape marks the minimum insertion as
indicated on the stem. Clean but with some chrome loss. There is a larger loss area on the stem from being inside the steerer but that is below the min insertion
so it would not be visible. The fwd extension is a little over 3 inches, angle from the
stem is 115 degrees.
Returns Accepted for this item if it's within 14 Days